ordering

downloads

contact us

links

 

High Spec Lead Acid Battery Conditioner.

This unit will condition and keep charged all 12V vehicle batteries. Its high output means that it rapidly recovers discharged units, and easily powers modern vehicles' alarms radios etc, most similar units have inadequate current output.

Standard 12V Version; 24V for Marine use also available.

 

• 3-step charge control with timer
• Plug-in unit - switch mode
• Charge current not affected by
  fluctuations in mains voltage
• Protected against reversed polarity
• LED-indicator with 3 colours
• Available with medical approval
  (EN 60601) - model 9641
• Complies with the relevant
  EU directives
• CE-marked

 

Technical specifications  ( 12 V version)
Input voltage:	190 - 264 VAC / 240-360 VDC
Charging voltage	14,7 V ± 0,1 V cycle, 13,8 V ± 0,1 V standby
Max output power:	40 W
Load regulation (0,2-2,4 A load and 230 VAC mains):	< 200 mV
Line regulation (190-264 VAC mains at full load):	< 20 mV
Switch frequency:	45 kHz
Leakage current from battery when mains switched off:	< 100 uA
Temperature range:	-10°C - +40 °C
Ripple:	< 20 mV p-p 40 kHz and 100 Hz
Efficiency (at full load):	> 81 %
Current limiting:	2,7 A ± 0,3 A
Insulation class:	II
Electrical safety standard:	EN 60335-1, EN 60335-2-29 EN 60065, EN 60950
EMC standards
Emission:	EN 50081-1
Immunity:	EN 50082-1
Indicators
Red (constant current):	2.7 A
Yellow (constant voltage timer):	14.7 V
Green (constant voltage standby):	13.8 V
Timer:	2 h ± 30min.
Output terminals
Cord with crocodile clips
Dimensions without plug (LxWxH):	100 x 51 x 63 mm
Weight:	0.25 kg
Some technical specifications may differ for other voltage versions. The timer is also avialable with other values.

Input (VAC) Output (VDC) Current limit (A) Max. output power (W) Cycle Standby 90-130 14,7 ± 0,1 13,8 ± 0,1 2,7 ± 0,3 40 190-264 14,7 ± 0,1 13,8 ± 0,1 2,7 ± 0,3 40

© GAA 2003-